Model Number

CRGL-C100-NIT-12

12" Class 100 Cleanroom Nitrile Gloves (CRGL-C100-NIT-12)

1. Material: 100% Nitrile Latex.
2. Particle Count: Particle size of 0.5 micron & above
Max. 1200 /cm2
(Tested in accordance to Seagate Method (Doc. Number: 35344-001 Rev. M))
3. Trace Elements: Trace elements (symbol) Maximum
Fluoride (F) NA mg/g
Chloride (Cl) 0.10 mg/g
Bromide (Br) NA mg/g
Nitrate (NO3) 0.20 mg/g
Phosphate (PO4) NA mg/g
Sulfate (SO4) 0.10 mg/g
Sodium (Na) NA mg/g
Potassium (K) NA mg/g
(Tested in accordance to Seagate Method (Doc. Number: 35344-001 Rev. M))
4. Copper Strip Test: No Discoloration.
5. FTIR: Residue to contain < 0.4 ng/cm2 Silicone oil, and no detectable Amide or DOP.
(Tested in accordance to Seagate Method (Doc. Number: 35344-001 Rev. M))
6. Non-volatile residue: Max. 35.0 mg/g. (IPA/Hexane)
(Tested in accordance to Seagate Method (Doc. Number: 35344-001 Rev. M))
7. Surface Resistivity: Max. 10e11 ohms/square. (Tested in accordance to ASTM-D257)
8. Static Decay: Max. 3 seconds. (Tested in accordance to FTMS 101-C, 4046)
9. Triboelectric charge: Max. 50 volts.
10. Color: White.
11. Design and Feature: Ambidextrous, straight fingers, textured or smooth and beaded cuff.

12. Dimensions: Glove size Palm width (mm) Length (mm)
Extra-small 70? 10 min. 280mm
Small 80? 10 min. 280mm
Medium 95? 10 min. 280mm
Large 110? 10 min. 280mm
Extra-large 115? 10 min. 280mm
13. Thickness: Location of thickness measurements
Finger (at 15mm from fingertip) min. 0.28mm
Palm (at center of palm) min. 0.20mm
14. Physical Properties: Before aging After aging
Tensile Strength (Mpa): Min. 18 (Before Aging) min. 16 (After Aging)
Ultimate Elongation (%): Min. 500 (Before Aging) min. 400 (After Aging)
15. Packaging: 100 pieces of gloves per double polybags, 10 polybags per master polybag, 1 master polybag per carton.
Note: Inner & outer polybags are manufactured & processed in Class 100 Cleanroom
16. Certificate of: A certificate of conformance is available upon request to ensure all products shipped conform to specified specification.
17. Quality Assurance: Manufactured under ISO 9002 Quality System.
Meet or exceed ASTM D3578-95 on water leak & dimension.
The information above is a guideline of typical performance values and characteristics of the products & not to be use as actual product specifications.

Standard:SGS

Unit Price/Payment:T/T

Trademark:N/A